Skip to content

Product Guides & Training Resources

Step-by-step pictorial and video guides

How to use Evolve® Revive, Evolve® HA, Evolve® Carbomer 980, and Evolve® Carmellose

Follow these steps each time you use your Evolve® eye drops.

Wash your hands thoroughly before use.

Step 1

Wash your hands thoroughly before use.

Before opening a new bottle of Evolve®, check that the safety seal is intact by checking the integrity of the bridges between the tamper-evident ring and the cap.

Rotate the cap anticlockwise to break the safety seal.

Step 2

Rotate the cap anticlockwise to break the safety seal.

Carefully remove the cap.

Tilt your head back and look up. Hold the bottle above your eye and gently pull down the lower eyelid to form a small pocket between your eyelid and your eye.

Step 3

Tilt your head back and look up. Hold the bottle above your eye and gently pull down the lower eyelid to form a small pocket between your eyelid and your eye.

Apply moderate pressure to the middle of the bottle to release one drop of Evolve® into the pocket. There may be a few seconds’ delay between squeezing the bottle and the drop being released. Do not squeeze the bottle too hard.

Blink a few times to spread the drop over the eye. If you think you have missed the eye, apply another drop.

Step 4

Blink a few times to spread the drop over the eye. If you think you have missed the eye, apply another drop.

Carefully wipe away any excess drops around the eyelid with a clean tissue. Repeat the process for the other eye, if required.

Shake the bottle once downward to remove any excess drops.

Step 5

Shake the bottle once downward to remove any excess drops.

Before replacing the cap, do not touch the bottle tip to your eye, fingers or any other surface.

Step 6

Before replacing the cap, do not touch the bottle tip to your eye, fingers or any other surface.

How to use Evolve® Eyelid Wipes and Lumecare® Eyelid Wipes

Before you start

  • Check the sachet is sealed and undamaged.
  • If you wear contact lenses, remove them before use.
Wash and dry your hands.

Step 1

Wash and dry your hands.

Open the sachet and remove the wipe.

Step 2

Open the sachet and remove the wipe.

Close one eye.

Step 3

Close one eye.

Gently wipe from the inner corner outward across the lashes.

Step 4

Gently wipe from the inner corner outward across the lashes.

Dispose of the wipes immediately after use.

Step 5

Dispose of the wipes immediately after use.

How to use Lumecare® Singles Carmellose and Lumecare® Singles Hypromellose

Detach the container to be used.

Step 1

Detach the container to be used.

To open, twist and pull the tab to remove.

Step 2

To open, twist and pull the tab to remove.

Instil 1 or 2 drops in the eye(s) and discard the container.

Step 3

Instil 1 or 2 drops in the eye(s) and discard the container.

Not for multiple use. Discard the vial after single use.

Step 4

Not for multiple use. Discard the vial after single use.

Video guide

Watch our step-by-step video guide for using Evolve® eye drops.

Video coming soon